Compact Power.
More Freedom.
Meet the ERAYAK 2400P gasoline inverter generator. Delivering 2,400 peak watts and 1,800 running watts, this lightweight portable generator combines quiet operation, clean inverter power and everyday convenience for camping, outdoor adventures and selected household essentials.
Light to Carry. Ready to Power.
Compact gasoline inverter performance with quiet operation, efficient fuel use and clean 120V power for smaller everyday loads.
2,400W Peak Power
Delivers 1,800 running watts with up to 2,400 peak watts for compatible starting loads.
52 dB Noise Level
Quiet enclosed inverter design makes portable power more comfortable during outdoor activities.
THD <1.2%
Low-distortion pure sine wave inverter output helps power compatible sensitive electronic devices.
42 lb Compact Design
Lightweight construction and integrated carrying handle help simplify transport and storage.
Up to 8.5 Hours
ECO operation helps reduce fuel consumption during lighter loads. Runtime varies by use.
Dual USB Charging
Two built-in USB ports share a combined 5V / 2.1A output for compatible USB devices.
Your Compact Power Hub.
Two 120V AC outlets, auxiliary DC output, dual USB charging and essential operating controls are organized on one easy-to-access panel.
Complete view of the AC connections, DC and USB outputs, digital meter, ECO control and protective indicators.
Dual 120V · 15A AC Outlets
Two covered 120V household-style AC receptacles for compatible appliances, electronics and camping equipment.
Voltage: 120V AC
Rating: 15A
Total Rated Output: 1,800W shared
12V DC · 5A Output
Dedicated DC receptacle intended for compatible 12V automotive-type battery charging applications.
Rating: 12V / 5A
Important: Not a regulated general-purpose 12V electronics supply
Dual USB · 5V / 2.1A
Two built-in USB charging ports for compatible phones and small USB-powered electronic devices.
Voltage: 5V DC
Combined Output: 2.1A shared across both ports
V.F.R.T Digital Meter
Integrated display provides convenient access to essential operating information during generator use.
F: Frequency
R: Single Run Time
T: Total Run Time
ECO Mode Switch
Adjusts engine speed according to electrical demand to help reduce fuel consumption during lighter-load operation.
ECO OFF: High startup loads and DC operation as instructed in the manual
3-Color Status Indicators
Three dedicated indicator lights help identify normal output, overload conditions and low-oil alerts.
Red: Overload
Yellow: Oil Alert
DC Circuit Protector
Helps protect the DC output circuit from excessive electrical demand.
Reset: Remove the overload and follow the manual before resetting
Ground Terminal
Dedicated generator grounding terminal for connections made according to the owner's manual and applicable regulations.
Important: Follow applicable electrical safety requirements
The Right Power for Smaller Loads.
The 2400P provides 120V portable inverter power with 1,800W continuous output and up to 2,400W temporary peak output. Always plan around the continuous running rating.
Continuous Generator Power
Up to 1,800W rated output for compatible 120V appliances. Total connected running demand must remain within the generator's rated capacity.
Temporary Peak Output
Additional short-duration output may help start compatible motor-driven appliances with temporary startup demand. Peak power is not continuous power.
Dual 120V AC Receptacles
Two 120V 15A outlets supply compatible household-style loads. Both outlets share the generator's total 1,800W rated capacity rather than providing 1,800W each.
Important: The generator's maximum temporary output, continuous rated output and individual receptacle current ratings are separate limits. Motor-driven loads can require additional starting watts. Even equipment with running demand below 1,800W may exceed the generator's available startup capability. The 2400P is a 120V-only generator and does not provide 240V output. It is not equipped with a 30A RV receptacle or parallel interface.
Small Generator.
More Freedom.
From camping trips and tailgating to outdoor workspaces and selected household essentials, ERAYAK 2400P provides convenient portable 120V power.
Camping
Lighting, charging and small appliances
Tailgating
Outdoor gatherings and portable power
Home Essentials
Selected small 120V household loads
Mobile Workspace
Laptops and work electronics
Small Backup
CPAP and compatible essential devices
Plan Your Power.
Explore 10 common smaller appliances and electronic loads ranked from higher to lower estimated starting or maximum input wattage. Always verify actual running and starting power before use.
Power Planning Note: All wattages shown above are illustrative planning estimates, not tested specifications for particular appliance models. Starting demand for refrigerators, freezers and air conditioners can vary significantly. Appliances requiring startup power near the generator's 2,400W peak rating may not start reliably. Maximum values for microwaves, coffee makers and rice cookers refer to approximate electrical input rather than motor-starting surge. The ERAYAK 2400P provides 2,400W maximum temporary output and 1,800W continuous rated output at 120V. The two 15A AC outlets share the generator's total available power. Check actual appliance nameplate ratings, startup requirements, plug type and combined running load before use. Not all illustrated appliances are intended to operate simultaneously.
Built for Everyday Convenience.
Manual Recoil Start
The 2400P uses manual recoil starting with an integrated engine switch and choke control. Electric and remote starting are not included.
ECO Mode
Adjusts engine speed according to demand to help conserve fuel. Turn ECO off for higher starting-current loads and DC operation as described in the manual.
Extended Runtime
Up to 8.5 hours of runtime in ECO operation, depending on connected loads and conditions. Gasoline tank capacity: 0.95 gal / 3.6L.
Clean Inverter Power
Pure sine wave inverter output with THD <1.2% supports many compatible sensitive electronic devices.
Engine & Maintenance
79.8cc four-stroke gasoline engine. Engine oil capacity: 0.36L / 360mL. Check oil level before starting.
Protection System
Low-oil warning, overload indication and DC circuit protection help monitor operation. Disconnect excess loads and follow the manual if an overload occurs.
Connect Your Devices the Right Way.
The 2400P provides convenient 120V portable power for compatible household-style appliances and outdoor equipment. Choose correctly rated cords, confirm startup demand and stay within the generator's available output.
Choose the Right Connection
Use either of the two 120V 15A AC outlets for compatible equipment. The generator does not have a built-in 30A RV receptacle. A 30A RV adapter is not included.
Check Power Requirements
Check appliance voltage, running watts and temporary startup demand. Use properly rated outdoor extension cords and compatible connectors. Never exceed 1,800W total continuous output.
Start and Add Loads Gradually
Start the generator according to the owner's manual. Allow stable operation before adding loads. Turn ECO off when needed for appliances with higher startup current requirements.
RV Compatibility: The 2400P has two standard 120V 15A AC outlets, but no built-in TT-30R or L5-30R receptacle. A suitable external adapter may allow connection to certain compatible low-power RV setups, but adapters do not increase generator output. The 2400P does not provide full 30A RV electrical service or 240V power. Check RV surge-protector and neutral-ground compatibility before use. Do not use an adapter to bypass electrical protection requirements.
Operate the generator outdoors only, at least 20 ft from doors, windows and vents, with exhaust directed away from occupied buildings. Never operate inside an RV, tent, garage, home, shed or other enclosed or partially enclosed space. Use working carbon monoxide alarms and keep the generator dry. Never operate in rain, standing water or flooded conditions. Use properly rated electrical cords, adapters and connectors. Never connect a generator directly to household wiring without approved, properly installed transfer equipment. Follow the owner's manual for grounding, DC battery charging, ECO operation and overload protection. Turn off or disconnect electrical loads before stopping the generator. Allow the engine to cool before refueling. Always follow applicable electrical and generator safety requirements.






















































